The right choice for the laser manufacturers who want a controller suitable to be built directly into the laser.
Moncha display offers large number of standard outputs and inputs as DMX in/out, ILDA in/out, Ethernet, SD-card and display.Display gives you an option to do setup direct on laser device.
One of the greatest benefits is that the display allows you to see, control and change all laser device settings directly on the device without using any software.
Of course there is a safety key which gives you the ability to lock the laser and prevent unwanted use.
Naturally, there are many kinds of connectors available, from DMX in/out or ILDA in/out to Ethernet, and Display. Moncha Display offers you, on top of easy-to-read 1.75 inch display, all of the inputs and outputs you could possibly need.
40 x 40 x 20 mm
50 x 50 x 20 mm
Of course! Included are also DMX in/out, ILDA in/out, Ethernet and an SD-card. Through these you can simply establish connection to or from the device.
In case you wish to use other devices (different hardware) than Moncha, you can utilize ILDA output. ILDA output enables you to keep all the basic settings such as inverting axis or safety key.